Thursday, February 13, 2020

Aircraft inspection either a 100 hourly inspection or annual Research Paper

Aircraft inspection either a 100 hourly inspection or annual inspection student comes up with the type of scenerio - Research Paper Example This involved inspection of the aircraft’s conformity to prescribed regulations. Conformity inspection involved review of designated data and all document required as per the stipulations by the Federal Aviation Administration (FAA). As a matter of fact, conformity inspection sought to ensure that JPY had correctly undertook all processes and tests required by FAA. Additionally, it involved inspection of the parts to ensure they are in compliance with design data. Initial investigations involved evaluation of the existing documents for conformity before comparing the engine’s current condition to conformity requirements. Finally, the areas with problems were identified and appropriate course of action adopted. Of interest were the permanent records provided by JPY and these included the following: 1. The aircraft’s log book: confirmation for valid seal from FAA and existence of validly filled information 2. Aircraft Worthiness Certificate documentation. This cert ifies that the aircraft owner and operator have maintained the aircraft in airworthy condition. Additionally, it allows understanding of the persons allowed to perform maintenance, preventive maintenance, or any alterations on the aircraft. Conventionally, two conditions have to be met before the aircraft is considered â€Å"airworthy†. 3. A supplemental type certificate (STC) is a type certificate (TC) issued when an applicant has received FAA approval to modify an aircraft from its original design.  Ã‚  The STC, which incorporates by reference the related TC, approves not only the modification but also how that modification affects the original design. These are useful in not only knowing the modifications but also the effect that the modification had on the aircraft’s original design. 4. The Type Certificate Data sheet :) that is, when the aircraft configuration and the components installed are consistent with the drawing, specifications, and other data that are p art of the TC, and include any supplemental TC and field-approved alterations incorporated into the aircraft. 5. The Pilot’s Operating hand book provides useful information on weight and balance, operating ranges of the aircraft and airworthiness of the aircraft. 6. Also , included with the aircrafts documentation came the weight and balance certificate Description of the scenario The aircraft was brought was availed for repair by JPY. The process was initiated through a call from JPY to our maintenance department complaint being magneto issues encountered earlier. JPY had initially thought the issue had been resolved but it suddenly recurred and hence the need for further inspection and correction. The first meeting between us and JPY was held on the 23rd of November, 2013 at 1654 Entrance Drive New Braunfels Texas on the Flight Ramp outside the hanger’s main entrance. JPY flew the aircraft from Karnes County Airport to our facility. During the meeting, a comprehensiv e discussion of the problems encountered with JPY’s Cessna 320B were discussed, in addition to various documentations for the aircraft being handed over for inspection. The log books revealed that the aircraft was due for 100-hourly

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.